Westfire WF23 Manuel d'instructions

WESTFIRE INSET STOVES MODELS: WF32/UNIQ 32 NARROW AND WIDE FRAME, WF23/UNIQ 23 INSET STOVE IMPORTANT These appliances will

WESTFIRE WF32/ UNIQ 32 INSET WIDE FRAMED MODEL

WESTFIRE WF23/UNIQ 23 INSET, WESTFIRE WF32/UNIQ32 INSET WF32/UNIQ32 INSET Narrow frame WF32/UNIQ32 INSET Wide frame WF23/UNIQ23 INSET Std frame Hei

Operating your stove- WESTFIRE WF23/UNIQ 23 INSET, WESTFIRE WF32/UNIQ32 INSET The first lighting of your stove. The heat-resistant paint on your

RE-FUELING To re-fuel your stove in the cleanest way. Only refuel your stove when flames have died down and you have glowing embers. Before refuellin

CONTROLS on WESTFIRE WF 32 /UNIQ32 INSET CONTROLS on WESTFIRE WF 23 /UNIQ 23 INSET Door operation When op

WOOD FUEL IMPORTANT: Never use toxic wood such as chipboard, impregnated, painted wood or pre-sawn wood such as pallets. Good quality wood is

FIRE BRICK INSTALLATION SEQUENCE - WESTFIRE UNIQ 23 Vermiculite brick set for the Uniq 23 freestanding and Uniq 23 inset .

FIRE BRICK INSTALLATION SEQUENCE - WESTFIRE UNIQ 23 - continued Left base brick 5 positioned. Left side brick 6 positioned on top of left base

FIRE BRICK INSTALLATION SEQUENCE - WESTFIRE UNIQ 23 - continued Grate 13 fitted. Log retainer 14 fitted. Grate support 12 fitted.

FIRE BRICK INSTALLATION SEQUENCE - WESTFIRE UNIQ 32 Outer top baffle brick 1 must be held in place a

UK: Installation Manual and Operating instructions WESTFIRE WF23/UNIQ 23 INSET, WESTFIRE WF32/UNIQ32 INSET This manual refers to the stove type list

FIRE BRICK INSTALLATION SEQUENCE - WESTFIRE UNIQ 32 Left base brick 7 fitted. Right base brick 8 fitted. Rear base brick 9 fitted. Front base

Trouble shooting 1. Fire will not burn - check a) the air inlet is not obstructed in any way, b) that chimneys and flueways are clear, c) that a su

WARNING NOTE Properly installed, operated and maintained this stove will not emit fumes into the dwelling. Occasional fumes from de-as

PREPARATORY WORK AND SAFETY CHECKS - IMPORTANT WARNING This stove must not be installed into a chimney that serves any other heating appliance. There

WF 23 / UNIQ 23 BUILDERS APERTURE SIZE WF 32 / UNIQ 32 BUILDERS APERTURE SIZE WF23/UNIQ 23, WF 32 / UNIQ 32 DOOR REMOVAL Narrow frame model Wide

Installing the appliance I) Remove door and frame a. Open door and lift so bottom hinge in lifts out of holder. b. Tilt base away from stove and lo

Distance to Combustible materials Combustible materials should not be located where the heat dissipating through the walls of fire

Hearth The hearth should be able to accommodate the weight of the stove and its chimney if the chimney is not independently supported. The WESTFIRE W

WESTFIRE WF23/ UNIQ 23 INSET MODEL

WESTFIRE WF32 / UNIQ 32 INSET NARROW FRAMED MODEL 405mm 810.00mm